• Screws around loudspeakers

Hello,

Following last Massimo’s advices around boses stands, I keep in mind that the tightening is important, and I have remembered that sometimes with the four screws around loudspeakers, only three can be tight : the last one turn, at the end, in the void.

I used to tight all this screws when I have a new speakers or after a certain period. My question is, what is your advice when you cannot tight a screw ? I didn’t disassemble the speaker and may be there is a “screws insert” on the boxes.

Thanks
Franck

BUZZ78 ha scritto: mer 24 feb 2021, 7:14 Hello,

Following last Massimo’s advices around boses stands, I keep in mind that the tightening is important, and I have remembered that sometimes with the four screws around loudspeakers, only three can be tight : the last one turn, at the end, in the void.

I used to tight all this screws when I have a new speakers or after a certain period. My question is, what is your advice when you cannot tight a screw ? I didn’t disassemble the speaker and may be there is a “screws insert” on the boxes.

Thanks
Franck

If a screw turns loose, you need to disassemble the speaker and understand why this happens. It is important that all four screws are tight.

It seems “logical” indeed. Do you know if the screws are directly tight “in the wood” ?

After checking, I have one nut (not a screw on 600 boxes) around the medium speaker and two on an other speaker around the tweeter that can’t be tight.

Screws around loudspeakers

Screws around loudspeakers

Re: Screws around loudspeakers

Re: Screws around loudspeakers

Re: Screws around loudspeakers